Heat shrinkable tubing adhesive lined
Art.-No. 340-06022 | EPS-300-6/2-PO-X-BK | Details

PTA300 and PTA400 offer high shrink ratios and protection against humidity.

Flexible, thin wall polyolefin heat shrink tubing
With coextruded hot melt adhesive inner wall
Protects against moisture
Provides an environmental sealing of complex parts

Package size

1.2 m

50 m

300 m

You have selected a different package size. The displayed product may differ slightly from the original product. You can see possible differences here in comparison.

Add to watchlist

Request your individual offer now

Request quote

Distributors near you

Downloads Datasheet

More products in this product group:

Heat shrinkable tubing adhesive lined >

Base Data

Application	Heat shrinkable tubing EPS seals and protects a wide variety of electrical applications like back end connector sealing, connector-to-cable transitions and splices.
Behaviour At Low Temperature	not cracking
Behaviour at low Temperature test method	IEC 60684-2
Colour	Black (BK)
Heat Shock Elongation	480%
Heat Shock Tensile Strength	12MPa
Heat Shock Test	4h/200°C
Heat shock test test method	IEC 60684-2
Material	Polyolefin, cross-linked (PO-X)
PART DESCRIPTION	EPS-300-6/2-PO-X-BK
Pack Cont.	50m
Package Content packed in	Lengths
Printable	No
Product Family	EPS-300 - 3:1 shrink ratio
Product Group	Heat shrinkable tubing adhesive lined
Shrink Ratio	3:1
Type	EPS-300-6/2
Variant	Thin-Wall
With inner glue (Yes/No)	Yes

Product Dimensions


Longitudinal Change After Shrinkage	-5% max.
Recov. ∅ d	2.0mm
Supplied ∅ D	6.0mm
Thickness of Adhesive (TA) nom.	0.50mm
Wall (WT)	1.00mm

Downloads

Material datasheet

Download

Specifications

Adhesive	Hot melt adhesive
Dielectric Strength	45kV/mm
Dielectric Strength test method	IEC 60684-2
Elongation at break	450%
Elongation at break test method	IEC 60684-2
Halogen-free	No
Minimum Shrink Temperature	+120 °C
Operating Temperature	-55 °C to +125 °C
ROHS compliant	Yes
Self extinguishing	Yes
Softening Point Adhesive	+90 °C
Specifications	SAE - AMS - DTL-23053/4
Specifications
Tensile Strength	14MPa
Test Method Tensile Strength	IEC 60684-2
UL Recognized (US and Canada)	No
Volume Resistance	10¹² Ω cm
Volume Resistance test method	IEC 60684-2

Logistics and Packaging

Country of Origin	NL
GTIN-13 / EAN	4031026710532
Reel Length	300.0m

More Information

ETIM 7.0 Key	EC000217
ETIM 8.0 Key	EC000217
ETIM 9.0 Key	EC000217
UNSPSC Key	39121723

Calculators

Calculator tool for Heat Shrink Tubing

Calculator tool for Heat Shrink Tubing

for EPS-300-6/2 - Art.-No.: 340-06022
In selecting the right shrink tubing size it is important to consider to "80:20 rule". Shrink tubing should recover at least 20% and maximum 80% of its potential shrink range.
According to which specification would you like to check if the selected product is suitable for your application?

diameter

Please enter either the smallest and/or the largest outer diameter of the substrate.

Min mm Max mm

Cross-Section

Please enter either the smallest and/or largest cross-section of the object to be covered.

Min mm² Max mm²

perimeter

Please enter either the smallest and/or largest perimeter of the object to be covered.

Min mm Max mm
Wall thickness calculator

Wall thickness calculator

for EPS-300-6/2 - Art.-No.: 340-06022

Depending on the substrate dimensions when Heat shrink tubing is recovered the diameter and the wall thickness will change. This Calculator aims to offer a theoretical wall thickness for this situation.Please enter the outer diameter of the object to be covered

Outer diameter of object (A)

mm

Inner diameter of tubing after shrinking (B)

mm

Wall thickness fully recovered ( C )

mm