3-PO-X-GN | Details

Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.

Thin wall, very flexible polyolefin tubing
A small range of sizes cover a wide range of diameters allowing reduced inventory
Fast shrinking and low shrink temperature
Flame-retardant, UL224 VW1 listed

Package size

30 m

150 m

You have selected a different package size. The displayed product may differ slightly from the original product. You can see possible differences here in comparison.

Add to watchlist

Request your individual offer now

Request quote

Distributors near you

Downloads Datasheet

More products in this product group:

Heat shrinkable tubing 3:1 - flexible and coloured >

Base Data

Application	If higher fire protection is a requirement TF31 heat shrinkable tubing is a good choice. It is used for protection, insulation and identification wires, cables and light duty harnesses.
Behaviour At Low Temperature	not cracking
Behaviour at Heat Shock	not dripping, not fluid, not cracking
Behaviour at low Temperature test method	UL 224
Colour	Green (GN)
Elongation At Heat Aging	400%
Heat Aging Test	168h/158°C
Heat Aging test method	SAE-AMS-DTL-23053
Heat Shock Test	4h/250°C
Material	Polyolefin, cross-linked (PO-X)
PART DESCRIPTION	TF31-9/3-PO-X-GN
Pack Cont.	30m
Package Content packed in	Reel
Printable	No
Product Family	TF31
Product Group	Heat shrinkable tubing 3:1 - flexible and coloured
Short Description	Heat Shrinkable Tubing 3:1 flexible 9/3 green
Shrink Ratio	3:1
Type	TF31-9/3
Variant	Thin-Wall
With inner glue (Yes/No)	No

Product Dimensions


Longitudinal Change After Shrinkage	+5%/-15%
Recov. ∅ d	3.0mm
Supplied ∅ D	9.0mm
Wall (WT)	0.80mm
Weight/Unit	0.02633kg

Downloads

Specifications

Dielectric Strength	30kV/mm
ELV compliant Dir. Art. 4 (2)	YES
Elongation at break	4%
Elongation at break test method	ASTM D638
Flammability	UL 224 VW-1
Halogen-free	No
Hazardous Goods	No
Minimum Shrink Temperature	+90 °C
Operating Temperature	-55 °C to +135 °C
ROHS compliant	Yes
Self extinguishing	Yes
Specifications	ANSI/UL 224, CSA-C22.2 No.198.1-99
Specifications
Tensile Strength	12MPa
Test Method Tensile Strength	ASTM D638
UL OCD link	Link
UL Recognized (US and Canada)	Yes
UL Recognized (US and Canada)	No
UL-File Number	E143529
Volume Resistance	10¹⁴ Ω cm
Volume Resistance test method	ASTM D876
Water Absorption	0.25%

Logistics and Packaging


Country of Origin	JP
Customs Number	39173200
GTIN-13 / EAN	4031026226743
Packaging 1 - Height (m)	0.4m
Packaging 1 - Length (m)	0.4m
Packaging 1 - Qty	30
Packaging 1 - Type	Reel
Packaging 1 - Volume (m³)	0.0096m³
Packaging 1 - Weight (kg)	0.79kg
Packaging 1 - Width (m)	0.06m
Packaging 3 - Height (m)	0.055m
Packaging 3 - Length (m)	0.405m
Packaging 3 - Qty	30
Packaging 3 - Type	Carton
Packaging 3 - Volume (m³)	0.0089m³
Packaging 3 - Weight (kg)	1.29kg
Packaging 3 - Width (m)	0.4m
Packaging 4 - Height (m)	1.244m
Packaging 4 - Length (m)	1.2m
Packaging 4 - Qty	2400
Packaging 4 - Type	pallet
Packaging 4 - Volume (m³)	1.194m³
Packaging 4 - Weight (kg)	124.192kg
Packaging 4 - Width (m)	0.8m
Reel Length	30.0m

More Information

ETIM 7.0 Key	EC000217
ETIM 8.0 Key	EC000217
ETIM 9.0 Key	EC000217
UNSPSC Key	39121723

Calculators

Calculator tool for Heat Shrink Tubing

Calculator tool for Heat Shrink Tubing

for TF31-9/3 - Art.-No.: 333-30905
In selecting the right shrink tubing size it is important to consider to "80:20 rule". Shrink tubing should recover at least 20% and maximum 80% of its potential shrink range.
According to which specification would you like to check if the selected product is suitable for your application?

diameter

Please enter either the smallest and/or the largest outer diameter of the substrate.

Min mm Max mm

Cross-Section

Please enter either the smallest and/or largest cross-section of the object to be covered.

Min mm² Max mm²

perimeter

Please enter either the smallest and/or largest perimeter of the object to be covered.

Min mm Max mm
Wall thickness calculator

Wall thickness calculator

for TF31-9/3 - Art.-No.: 333-30905

Depending on the substrate dimensions when Heat shrink tubing is recovered the diameter and the wall thickness will change. This Calculator aims to offer a theoretical wall thickness for this situation.Please enter the outer diameter of the object to be covered

Outer diameter of object (A)

mm

Inner diameter of tubing after shrinking (B)

mm

Wall thickness fully recovered ( C )

mm